产品展示
PRODUCT DISPLAY
技术支持您现在的位置:首页 > 技术支持 > 高低温试验箱 Temperature test

高低温试验箱 Temperature test

  • 发布日期:2018-07-17      浏览次数:1629
    • 高低温试验箱TEMPERATURE TEST

       

       

      Product Model

      high and low temperature testing chamber MAX-TL720-10

      • Sample restrictions

      The equipment is prohibited to test below:

      Flammable, explosive, volatile substance's sample testing or storage;

      Test samples or storage of corrosive substances;

      Testing or stockpiling of biological specimens;

      Strong electromagnetic radiation source sample's test or storage;

      Testing or storage of radioactive material sample;

      Test samples or store strong toxic substances;

      • Volume, size and weight
      • Nominal volume

      80~1000L,品达公司可承制非标试验设备。

      • Performance
      • Test environmental conditions

      An ambient temperature of + 5 ~ + 28 ℃, relative humidity ≤85%,under conditions of no sample within the test chamber;

      • Test Methods

       

      GB/T 5170.2-2008 Temperature Test Equipment

      GB/T 5170.5-2008 Humidity Test Equipment

      • Temperature range

      -70~+150℃

      • Control accuracy

      Temperature:±0.2℃

      (The difference between the controller setpoint and actual value of the controller)

      • Temperature fluctuation

      ≤0.5℃(Temperature fluctuation is half the difference between the center of the highest measured temperature and the minimum temperature.

      • Temperature error

      ≤±1℃(The average temperature of the studio temperature controller displays the value to minus the average temperature measured of the center)

      • Temperature uniformity

      ≤2.0℃(Temperature uniformity is each difference in the measured maximum and minimum temperatures of the test of arithmetic mean.

      • Warm-up time

      3℃/min(Nonlinear load)

      • Cooling time

      0.75~1.2℃/min(Nonlinear load)

      4.11 Working noise

      A Sound Level≤70dB(A)

      (At ambient temperature 25 ℃ and measured in the room of echo less interior noise; Using A-weighted, average of eight test points; Each test point level from the noise source 1 m, the height from the ground 1 meter.)

      4.11. Meet the test method

       

       

       

       

      GB/T2423.1-2008(IEC60068-2-1:2007) Low Temperature Test Method Ab

      GB/T2423.2-2008(IEC60068-2-2:2007) High Temperature Test Method Bb

      GJB150.4-1986   Low temperature test

      GJB150.3-1986   High temperature test

      GB/T2423.3-2006(IEC60068-2-78:2007)Constant damp heat test method Cab

      GB/T2423.4-2008(IEC60068-2-30:2005) Alternating hot and humid test method Db

      GJB150.9-1986   Humidity Test(Picture1, Picture2)

      (Per cubic meter load of not more than 35kg / m3 steel thermal capacity,test when no active wet heat, heat load)